|
|
1、The constitute of paper edge protector machine
Unwinding stations → Gluing station→ Gounding station→Forming station→Sever-motor cutting station→Packing station
2、We now have edge protector machine that can produce “L” type edge protector , “U” type edge protector , flat board and three-in-one integrated machine.
 |
 |
 |
|
“L” type edge protector |
flat paperboard |
‘U’ type edge protector |
|
Unwinding and gluing station
|
Single seat split. With brake, dual bearing steel sleeve
|
The tension of paper is adjustable,paper is put balanced,also can steer to backstands.
|
|
Double-sided adhesive layer on a plastic frame, automatic cycle and glue
|
Save glue, simple operation, small workload, glossy glue tube, glue ,scraper can be recycled, pneumatic diaphragm pumps, system timly for glue, coating evenly
|
|
Hemming device
|
Adjustment of the screw, aluminum frame,
|
Simple, fast and can do the largest corner protector 110 * 110MM,
|
|
Made of steel molding round 45 #, last round chrome molding material is 45 # steel wheels, the last round chrome plated wheel diameter is about 240MM
|
Forming stable, durable, bottom paper is unbreakable glossy, our own pressure system will track the thickness of the edge protector and adding pressure, do not pack air compressor
|
|
Forming system
|
cylinder
|
Fast production,good compatibility and stability,easy maintenance,
long life, low failure.
|
|
Pressure regulating valve
|
|
Manual valve
|
|
5.5KW main motor
|
|
Electronic Control
|
touch screen
|
1. Touch screen operation, keep informed of current production schedule 2、Chinese or English menu operation 。
3、Taiwan Delta precise positioning, small noise, rapid response, low failure rate.
|
|
drive
|
|
encoder
|
|
Motor-seve
|
|
Special servo cutting system
|
|
Fast cut-off station
|
|
improve the efficiency greatly and reduce the workload, the beautiful
Clean incision , stable performance, equipment maintenance is simple, replacing the knife is simple, convenient, fast, safe and less waste, can cut the largest edge protector 110 * 110mm .
|
|
Linear slides
|
|
Mechanical structure
|
international square tube
|
Reinforced frame structure design, effectively reduce the mechanical vibration and noise
|
|
10MM thick steel plate
|
Improve the mechanical life, all polished side panels
|
|
Production speed
|
Speed can be 25 meters per minute, length of corner protector can be 50MM
|
|
Production range
|
The minimum unilateral width is 25MM, maximum unilateral width is 110MM, the minimum thickness is two piece of 450G bobbin paper and one piece of 140G kraft paper ,the maximum thickness is 7MM. It can produces a wide range of side products, and size is standard, screw adjustment
|
|
Cutting length
|
50-9000mm
|
|
Cutting precision
|
±1.5mm
|
|
The rated voltage
|
380V、50Hz
|
|
Total power
|
8.5KW,Host motors, servo motors cut
|
|
Size of the equipment
|
Length = Host (8M + 2.4M) \ glue frame 3M \ paper holder 12M, total length 27.4M, For printing plus one meter wide and 0.8 meters, 1.8 meters high
|
|
This device and a slitting machine equipped with a compressor totaling 3KW, two air connectors
|
|
